
Metal Sheet

BOLT TYPE SP-30
Pro SP-30
- Suitable for roofs with a slope angle of 3 degrees ranging from 1 to 20 or more, depending on the length of the plate. And the amount of rain water
- Roofing height 30 mm. The wide use of 720 mm. Per sheet, with a beautiful view of the sheet close.
- Can be used as bare sheet or spray insulation PU FOAM is finished. CONTINUOUS a modern CNC machining can control the thickness and density of PU regularly.
- PU FOAM injection adhesive homogeneous no fire protection, thermal and sound installation convenience accomplished in a single step. Face was wrapped with material covered (FACING SHEET) to prevent disintegration. And degradation of PU FOAM.
- No bare plate bending radius PU FOAM.
- The natural arch (SPRUNG CURVED ROOFING) upside minimum radius of 35 meters.
- The roof of the pump curve (CRIMP CURVED ROOFING) radial-pump curve inverted minimum 250 mm.

BOTLESS TYPE KL-690
Pros KL-690
- Suitable for roofs with a slope angle of 2 degrees or more, or about 1 to 30 depending on the length of the plate. And the amount of rain water The installation must be checked to ensure that the students have class in the plane. And gutter to drain rain water without interruption.
- Roofing height 38 mm., Improves the rainfall and strength to the structure.
- To prevent leakage of rain water is best. Because the installation did not screw shot on the roof. But using the mounting clip lock.
- Flexible structure for both the prone and supine form.
- The natural arch (SPRUNG CURVED ROOFING) upside minimum radius of 50 meters.
- The roof of the pump curve (CRIMP CURVED ROOFING) radial-pump curve inverted minimum 500 mm. Upturned minimum 500 mm.

BOLTLESS / BOLT / BOLT CAP SP 40-720
Pros SP 40-720
- Suitable for roofs with a slope angle of 2 degrees or more, or about 1 to 30 depending on the length of the plate. And the quantity of water
- Roofing height 40 mm. The wide use of 720 mm., Improves the rainfall and strength to the structure.
- Installation, choose the 3 types of Screw, a locking clip or a screw and a screw cap.
- BOLT & CAP system is installed at its best. Due to solve leakage caused by a screw or screws solutions Leaflet caused by plate right leg locking clip.
- You can use the bare PU FOAM insulation or spray a room for Persons treated remote. CONTINUOUS modern CNC machines using a controllable thickness. And density of PU has regularly.
- PU FOAM injection adhesive homogeneous no fire protection, thermal and sound installation convenience accomplished in a single step. Face was wrapped with material covered (FACING SHEET) to prevent disintegration. And degradation of PU FOAM.
- FACING SHEET have either ALUMINUM FOIL, PVC SHEET AND METAL SHEET.
- The natural arch (SPRUNG CURVED ROOFING) upside minimum radius of 50 meters.
- The roof of the pump curve (CRIMP CURVED ROOFING) radial-pump curve inverted face a minimum of 500 mm. minimum 500 mm.

BOLT TYPE TD-735
Pros TD-735
- Suitable for roofs With a slope of 3 degrees or more, or about 1 to 20, the plate and on the length of the rain. Including installation, check to make sure that the get on the plane and can spout. Drainage without interruption.
- Roofing height 29 mm., Improves the rainfall. And add strength to the structure.
- The overlap of the roof has a groove water trap strips, waterproof back sheet length. Which prevents the absorption of water by vacuum, and to prevent leakage of rain water effectively.
- The blonde bitch is opposite. End plate placed on students Gives you strength in a row. Top of the roof
- Can be bent by the Structure image.
- The natural arch (SPRUNG CURVED ROOFING) upside minimum radius of 35 meters.
- The roof of the pump curve (CRIMP CURVED ROOFING) radial-pump curve inverted face a minimum of 500 mm minimum 200 mm.

BOLT TYPE S-740
Pros S-740
- Suitable for roofs with a slope angle of 4 degrees or more, or about 1 to 15 depending on the length of the plate. And the amount of rain water The installation must be checked to ensure that the students have class in the plane. And gutter to drain rain water without interruption.
- Roofing height 27 mm. The overlap of the roof (Side-Lap) Fluted water trap strips, waterproof back sheet length. Which prevents the absorption of water by vacuum (VACUUM) and to prevent leakage of rain water effectively.
- Can be bent by the structure.
- The natural arch (SPRUNG CURVED ROOFING) upside minimum radius of 35 m.
- The roof of the pump curve (CRIMP CURVED ROOFING) radial-pump curve inverted minimum 250 mm.

BOLT TYPE S-750
Pros S-750
- Suitable for roofs Mom with slopes from 2 to 1 per 30 degrees depending on the length of the plate. And the amount of rain water Including installation, check to make sure that the have. Level in the plane Gutters and rainwater can drain well and smoothly.
- Roofing height 38 mm., Improves the rainfall without interruption.
- Flexible structure for both the upside and simple.
- The natural arch (SPRUNG CURVED ROOFING) upside minimum radius of 50 meters.
- The roof of the pump curve (CRIMP CURVED ROOFING) radial-pump curve inverted minimum 250 mm. Upturned minimum of 250 mm.

BOLT TYPE S-760
Pros S-760
- Suitable for roofs with a slope angle of 5 degrees or more, or about 1 to 12 depending on the length of the plate. And the amount of rain water The installation must be checked to ensure that the students have class in the plane. And gutter to drain rain water without interruption.
- The overlap of the roof (Side-Lap) Fluted water trap strips, waterproof back sheet length. Which prevents the absorption of water by vacuum (VACUUM) and waterproofing.
- The blonde bitch is opposite. End plate placed on students Gives you strength in a row. Top of the roof
- Flexible structure for both the prone and supine form.
- The natural arch (SPRUNG CURVED ROOFING) upside minimum radius of 32 meters.
- The roof of the pump curve (CRIMP CURVED ROOFING) radial-pump curve inverted minimum 200 mm. Upturned minimum 200 mm.

PANEL SHEET HI TEN P-830
Pros P-830
- Steel Wall Plate SUNTECH PANEL SHEET HI-TEN P-830 looks wavy shallow. Elegant and beautiful Used for both interior and exterior walls. Available on both flat and curved planes. With a wave of stylish PANEL SHEET steel wall plates are ideal for mounting space required to beauty. Notably, instead of flat sheets used for ceilings as bulkhead partition wall factory gate under a canopy. The long side walls And width of the plant
- Because PANEL SHEET with wave length. Therefore, the strength With flexibility in width. You can choose to install the convolution of PANEL SHEET vertically or horizontally, but should not be used as roofing material PANEL SHEET.



