


SPU - 20 - 800
- Suitable for metal sheet roofing minimum slope of 3 degrees
- 20 mm of rib depth and 800 mm of cover width and are able to lap nicely
- Able to use as insulated or bared sheet
- For insulated sheet, the PU foam is sprayed onto the metal sheet with sophisticated machines and covered with facing sheet to protect the PU foam from deterioration. In addition, since there is no space between the sheet and the foam, so there is no condensation from temperature difference.
- Facing sheet can be selected from Aluminum Foil, PVC Sheet and metal sheet to suit your needs
- The sheet end can be left unsprayed for the purpose of lapping and overhang.
- The PU foam itself is fire retardant and withstand to acid and alkali. Furthermore, it is considered as Versatile Cellular Plastic, so it is strong and safe from ant and termite.
- Good protection from heat and sound
- Operating temperature from -118°C to 100°C
- PU foam can be sprayed as thin as 10 mm. When compared to other insulation materials with the same thickness such as PE foam, the SPU-800 is a much better choice for heat and noise protection for about the same cost.

SPU - 30 - 720
- Suitable for metal sheet roofing minimum slope of 3 degrees
- 20 mm of rib depth and 800 mm of cover width and are able to lap nicely
- Facing Sheet can be selected from Aluminum Foil, PVC Sheet and metal sheet to suit your needs.

SPU - 40 - 720
- Installation types can be selected from bolt, boltless and bolt & cap
- Bolt & Cap is the best installation method because the bolt can prevent the metal sheet blown away from the uplift wind and the cap prevents the leakage from the bolt.
- Able to use as a bare sheet or PU insulated sheet which produced from one of the most sophisticated machines that can control uniform thickness and density of the foam.
- The PU foam is a good insulated material that used to protect heat and sound and also fire retardant. It is covered with facing sheet to prevent the PU foam from deterioration.

SPU - 60 - 700
- Suitable for metal sheet roofing minimum slope of 1 degrees
- 60 mm of rib depth and 700 mm of cover width and are able to lap nicely
- Able to use as insulated or bared sheet
- For insulated sheet, the PU foam is sprayed onto the metal sheet with sophisticated machines and covered with facing sheet to protect the PU foam from deterioration. In addition, since there is no space between the sheet and the foam, so there is no condensation from temperature difference.
- Facing sheet can be selected from Aluminum Foil, PVC Sheet and metal sheet to suit your needs
- The sheet end can be left unsprayed for the purpose of lapping and overhang.
- The PU foam itself is fire retardant and withstand to acid and alkali. Furthermore, it is considered as Versatile Cellular Plastic, so it is strong and safe from ant and termite.
- Good protection from heat and sound
- Operating temperature from -180°C to 100°C
- PU foam can be sprayed from half inch by using Facing Sheet with Aluminum Foil, PVC Sheet and Metal Sheet



